Agri-75 Pelletizer

This machine is the first model in the 280mm range

Due to the chassis configuration of this machine, pellets of 2.2mm to 10mm can be manufactured using different die-ring setups. The Agri 75 pellet machine comes standard with a control panel that is built into the chassis to IP66 specifications. Apart from starting the pellet mill, this control panel also controls the feed rate of the machine. This control system uses a signal from the main motor to adjust the feeding auger speed. This same system is used on all our pellet mills up to the Agri 250. It can also be retro-fitted to any make or model of pellet mill. The Agri 75 is intended for the medium scale farmer. It must be incorporated into a basic pelleting plant.

MACHINE SPECIFICATIONS

  • Main Drive Motor: 22 Kw
  • Feed Motor: 0.75 Kw
  • Power Requirement: 41 Amp; 3 Phase 380/400 VAC @ 50HZ
  • Power Connection: 41 Amp from supply cable
  • Noise levels:
    • At operations panel:
    • No load:100dB
    • Full load:91dB
    • At 1 meter: 83dB
  • Rollers: 2 x slide adjusting
  • Roller Size: 115 x 80 mm
  • Capacity: 800 kg per hour depending on product being pelletised
  • Die Ring: Supplied with standard 6 x 40mm alloy die-ring
  • Machine Weight: 1189 kg
  • Automatic Lubricator: 3 month applicator

Options: Fully automated process control PLC systems, Automated lubrication system

Equipment required: Mixer & bagging unit

To download the technical drawing, including dimensions:
Right click HERE and click “Save Target As” or “Save Link As”.