Agri-250 Pelletizer

This machine is the only machine in the 300 mm range

Due to the chassis configuration of this machine, pellets of 2.2mm to 16mm can be manufactured using different die-ring setups. The reason for the larger pellet sizes is because the Agri250 comes in a wide model which enables it to take a bigger die-ring. The Agri 250 pellet machine comes standard with a control panel that is seperate to the chassis. The control panel is built to IP66 specifications. Apart from starting the pellet mill, this control panel also controls the feed rate of the machine. This control system uses a signal from the main motor to adjust the feeding auger speed. This same system is used on all our pellet mills up to the Agri 250. It can also be retro-fitted to any make or model of pellet mill. The machine must be incorporated into a full pelleting plant with the minimum equipment being a loading auger, mixer, hopper, cooling and bagging unit. The Agri 250 is intended for the large-scale farmer.

MACHINE SPECIFICATIONS

  • Main Drive Motor: 55 Kw
  • Feed Motor: 0.75 Kw
  • Power Requirement: 103 Amp; 3 Phase 380/400 VAC @ 50HZ
  • Power Connection: 103 Amp from supply cable
  • Noise levels:
  • At operations panel:
  • No load: 118dB
  • Full load: 100dB
  • At 1 meter: 95dB
  • Rollers: 2 x slide adjusting
  • Roller Size: 115 x 80 mm
  • Drive System: 8 x B Section V Belts
  • Capacity: 2.5 tons per hour depending on product being pelletised
  • Die Ring: Supplied with standard 6 x 40mm alloy die-ring
  • Machine Weight: 2250 kg
  • Automatic Lubricator: SKF System 24 – 1 month applicator

Options: Fully automated process control PLC systems, Automated lubrication system

Equipment required:

  • Loading auger
  • Mixer & bagging unit
  • Transfer auger to hopper
  • Hopper
  • Cooling and bagging unit

3-agri250

To download the technical drawing, including dimensions:
Right click HERE and click “Save Target As” or “Save Link As”.